• ISO 9001:2015 Certified Manufacturers of Hydraulic and Pneumatic Cylinders
tie rod

Tie Rod

A tie-rod cylinder uses the threaded steel rods to hold two end caps to the ends of the cylinder barrel. A strong advantage of the tie rod design is that it can be easily disassembled & examined for repair.

This type of cylinders provides long life and reliable operation attributed to the use of high quality materials plus many features included in this design. Jami Hydraulics is an ISO 9001:2015 certified manufacture of Tie Rod Type Hydraulic cylinders designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity with low cost of ownership.

A Safety Factor of 2.5 or better is built into cylinder. The Safety Factor is a function of The critical buckling load determined basically by the length of the cylinder and cylinder extensions Forces. Every tie rod cylinder is individually tested before leaving our plant to assure proper and leak free operation.

  • HIGH TENSILE STEEL TIE RODS
  • SINGLE AND DOUBLE ROD DESIGNS
  • EASY REMOVAL OF ROD GLAND FOR SEAL REPLACEMENT
  • HARD CHROME PLATED ROD WHICH INCREASE THE SEAL &CYLINDER LIFE
  • MODERNISTIC SEALING TECHNOLOGY
  • IDEAL FOR SINGLE ACTING & DOUBLE ACTING APPLICATIONS
  • A WIDE RANGE OF FLUID SPECIFICATIONS AND TEMPERATURE RANGES FROM -20°C TO 60 °C
  • CUSHIONING SOLUTIONS, AVAILABLE AT EITHER OR BOTH ENDS
  • WIDE RANGE OF MOUNTING AND ROD END ACCESSORIES
  • SPECIAL FEATURES, E.G. STROKE ADJUSTER, ROD BELLOW, GLAND DRAIN, PROXIMITY SWITCHES OR INTEGRATED LINEAR TRANSDUCERS CUSTOM DESIGNS ON REQUEST.
  • Die Casting
  • Roll mills
  • Assembly Line
  • Paper Machinery
  • Cement Industry
  • Factory Automation
  • Entertainment Automation
  • Packaging Machinery

GENERAL SPECIFICATIONS

  • Maximum Working Pressure (bar) 240
  • Bore Diameter (mm) Min. 25 to Max. 200
  • Rod Diameter (mm) Min. 16 to Max. 140
  • Maximum Stroke (mm) 5000
  • Minimum Working Temperature (°C) -20
  • Maximum Working Temperature (°C) 140 Mounting Styles 7
  • Cylinder Action Single/Double Acting
  • Port Type BSPP, Metric.

NPTF MATERIAL SPECIFICATIONS

  • Cylinder Barrels Carbon Steel Alloy
  • Pistons Carbon steel alloy
  • Rods High quality alloy steels with tensile strength
  • Base Castings & Rod Clevises High Tensile structural steel
  • Cylinder Heads High Tensile structural steel
  • Guiding bushes Brass, Bronze alloys
  • Seals Polyurethane, Pom-Ptfe-Bronge compound, Ptfe, NBR, VITON.

Snapshot

Copy