• ISO 9001:2015 Certified Manufacturers of Hydraulic and Pneumatic Cylinders
mill bolting

Bolting & Bolting

These types of cylinders have end flanges welded or threaded to the barrel and the end caps are attached to each flange. End caps are secured in place by bolts that go through holes in each end cap and thread into tapped holes in each end flange.

This construction is lighter and more compact than the standard tie-rod type. In some cases cylinders having thick barrel walls, end caps will be directly bolted to the barrel Jami Hydraulics is an ISO 9001:2015 certified manufacturer of Both Sides Bolting Type Hydraulic cylinders designed specifically for reliable, trouble free operation, making it ideal for heavy duty applications & are built to withstand the buckling under compressive loads A Safety Factor of 2.5 or better is built into cylinder.

The Safety Factor is a function of the critical buckling load determined basically by the length of the cylinder and cylinder extensions Forces. Every cylinder is individually tested before leaving our plant to assure proper and leak free operation

  • HIGH TENSILE STRENGTH BOLTS OF CLASS 8.8,10.9& 12.9
  • SINGLE AND DOUBLE ROD DESIGNS
  • HARD CHROME PLATED ROD WHICH INCREASE THE SEAL & CYLINDER LIFE
  • MODERNISTIC SEALING TECHNOLOGY
  • IDEAL FOR SINGLE ACTING & DOUBLE ACTING APPLICATIONS
  • A WIDE RANGE OF FLUID SPECIFICATIONS AND TEMPERATURE RANGES FROM -20°C TO 60°C
  • CUSHIONING SOLUTIONS & ADJUSTMENT OF THE CUSHION LENGTHS AVAILABLE AT EITHER OR BOTH ENDS
  • WIDE RANGE OF MOUNTING AND ROD END ACCESSORIES
  • SPECIAL FEATURES, E.G. STROKE ADJUSTER, ROD BELLOW, GLAND DRAIN, PROXIMITY SWITCHES OR INTEGRATED LINEAR TRANSDUCERS
  • CUSTOM DESIGNS ON REQUEST
  • Marine
  • Die casting
  • Off shore
  • Roll mills
  • Paper Machinery
  • Cement Industry
  • Factory Automation
  • Metal forming
  • Packaging Machinery

GENERAL SPECIFICATIONS

  • Maximum Working Pressure (bar) 240
  • Bore Diameter (mm) Min 30 to Max 320
  • Rod Diameter (mm) Min 18 to Max 200
  • Maximum Stroke (mm) 5000
  • Minimum Working Temperature (C) -20
  • Maximum Working Temperature (C) 140
  • Mounting Styles 5
  • Cylinder Action Single/Double Acting
  • Port Type BSP, Metric.

NPT MATERIAL SPECIFICATIONS

  • Cylinder Barrels Carbon Steel Alloy
  • Pistons Carbon steel alloy
  • Rods High quality alloy steels with tensile strength
  • Base Castings & Rod Clevises High Tensile structural steel
  • Cylinder Heads High Tensile structural steel
  • Guiding bushes Brass, Bronze alloys
  • Seals Polyurethane, Pom-Ptfe-Bronge compound, Ptfe, NBR, VITON.

Snapshot

03. MILL TYPE CYLD. - Copy